針對服裝生產車間的空調解決方案，服裝生產車間的特點為生產工作場所，服裝生產車間有大量發熱設備，服裝生產車間內生產人員多宿替。根據服裝生產車間的特點茴辈，空調選型推薦如下：HIMOD E18機型周拐。

This is a solution of A/C for a clothing workshop. The characteristic of the clothing workshop is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the clothing workshop, the selection of model is recommended as HIMOD E18.

經濟效益評估：(Economic Evaluation)

一沿信、  該印刷廠需安裝空調面積總計400平方米左右，有大量發熱設備和生產人員讲稀，對溫濕控制及節能有要求，依據實際情況每平米所需制冷量平均按450W計算背哎，總需求的180KW制冷量葱峡。

The total area is of about 400 square meters for the clothing workshop, and there is a large amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 450W, the total demand for cooling capacity is of 180KW.

二、  要滿足該項目180KW的制冷量龙助，需使用HIMOD E18機組3套裝機砰奕。

To meet the cooling capacity of 180KW, this project is needed to use four sets of unit (HIMOD E18).

三、  經濟效益對比估算：傳統空調滿足180KW制冷量的輸入功率至少為67.5KW左右泌参，而HIMOD E18機組3套主機的輸入功率合計為43.875KW脆淹，主機部分省電35%，全年共計節省電費4.5萬元以上沽一。(按1年運行8個月盖溺，1月運行30天，1天運行8小時铣缠，用電按1元1度計算)

Comparison of economic benefit estimation: the traditional air-conditioning input power (180KW cooling capacity) is at least about 67.5KW, and the HIMOD E18 input power per set is of 14.625KW. The energy saving is up to 35%. The annual saving is more than 45000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)